banner

Products

Wear Resistant High Alumina Ceramic Plate Factory Ceramic Lined

Wear Resistant High Alumina Ceramic Plate Factory Ceramic Lined

Qijing industrial ceramics are widely used in power, coal, metallurgy, chemical industry and other industries. As an abr
SHARE

Description

Basic Info
Model NO. DN75
Standard ISO9001
Transport Package Wooden Box
Specification 30-450
Trademark QIJING
Origin Shandong
HS Code 6914100000
Production Capacity 50000 Pieces a Year
Product Description

Qijing industrial ceramics are widely used in power, coal, metallurgy, chemical industry and other industries. As an abrasive material and corrosive medium.Qijing Industrial Ceramics is an ideal wear-resistant and corrosion-resistant pipeline, used to transport sand, coal, ash and aluminum liquid, and is suitable for different high-temperature pipeline inner diameters.In addition to the ash removal, slag discharge pipe, powder feeding and powder returning pipes of coal-fired power plants, ceramic-lined wear-resistant steel pipes are also widely used in the following industries:1. Mine:1. 1Coal water slurry, coal washing slime, mine filler, pulverized coal in the coal industry1. 2Metal mines: pipeline transportation of concentrates and tailings.2.1 Metallurgy:2. 2The blast furnace coal injection and slag conveying pipelines in iron and steel plants2.3 Optimal pipelines for steel-making conveying ferroalloys and refining outside the furnace.3. Cement plant. Photo show Ceramic pipe advantages:

  1. High hardness
  2. Superior abrasion
  3. Corrosion and chemical resistance
  4. Light weight
  5. Low maintenance cost: Super wear-resistance reduce the maintenance frequency and also the maintenance cost.
  6. Good fluidity : Smooth surface ensure the free flow of material without blocking
pipe sizes :
ProductID(mm)OD(mm)Thickness(mm)Length(mm)R(mm)Degree
Straight Tube7610615150-250//
Straight Tube10014020305//
Straight Tube15018517.5150-250//
Straight Tube15218215150-250//
Straight Tube20024020305//
Bend7610615/4007.5
Bend10113115/5005
Bend15018517.5/15003
Bend15118115/7507.5
Qijing Ceramic pipe sizes range : 10~500 mm
Specifications
alumina content
92959799
Al2O3(%)≥92≥95≥97≥99
Fe2O3(%)≤0.2≤0.15≤0.15≤0.1
Hardness≥8≥9≥9≥9
Porosity(%)≤0.02≤0.02≤0.02≤0.01
Density(g/cm3)≥3.60≥3.65≥3.75≥3.9
Length(mm)≤500≤500≤500≤500
MAX ID(mm)≤620≤620≤620≤620
Usage1) Thermocouple protections;2) Heat treatment furnace and toughened furnace;3) Inner liner tube and heating tube in electric furnace; 4) Some are used in furnaces.

Transport and installation precautions:Matters needing attention for transportation and installation of ceramic pipe1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.2. The qijing bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.5. When using flange connection, the flange end shall be flush with the end of the composite pipe.6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.Packaging


Packaging
SizeOrder
Weight500KG-
Packaging DetailsThe normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

 

Packaging
SizeOrder
Weight1.2 T-
Packaging DetailsThe normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

 

FAQ:Q: Are you trading company or manufacturer ?
A: We are factory
Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight
Q: What is your terms of payment ?
A: For new customers, 50% T/T in advance. For regular customers, 30% T/T in advance ,balance after received the B/L copy.

Our Contact